▄▄ ▄▄▄ ▀▀
▄▄██▀ ▄▄█▀ ▄▄██████▄
▄▄█▀███▀ ▄██▀ ▄██▀▀ ▀███
▄█▀ ▄▄█▀▀ ▄███ ▄███ ▄█████▄▄▄██▀▀ ▀█▄
▀██▄▄▄ ▄▄▄████▀▀▀████ ▄███ ▄███▀█▄▄▄▄ ▄▄▄██▀
▀███████████▀▀ ▀███ ▀███▄ ▀▀█▄ ▀▀▀████████████▀
▄▄███▄▄▄ ▀▀▀▀▀ ▄ ▀▀█▄▄ ▀▀▀▀ ▄ ▀▀▀▀▀▀ ▄▄▄███▄▄
▄███▀▀▀▀███▄▄▄ ▄▄▄██▀ ▀██▄▄▄ ▄▄▄███▀▀▀▀███▄
███ ▀▀▀▀▀▀▀ PROUDLY PRESENTS ▀▀▀▀▀▀▀▀ ███
██▄ ▄██
█▄ RML.Labs.SawStudio.FX.Plugin.Levelizer.v2.8 ▄█
█ █
▀█ █▀
█ SUPPLIER ..: TEAM AiR █
█ PROTECTION : $$$ █
█ SIZE ......: 01 * 4,77MB █
█ DATE ......: 10/2008 █
█ █
█ The SAWStudio Levelizer Plug-In module is a █
█ professional quality dynamics processing and █
█ mastering tool that offers enhanced Gate, Compressor █
█ and Peak Limiter/Normalizer functions to the █
█ SAWStudio user. This module also offers accurate Gain █
█ Reduction Metering of all combined functions, a █
█ Remove Silence function, and the ability to scan and █
█ display the highest 50 peaks within any range of █
█ MultiTrack audio! █
█ █
█ Each setting can be adjusted with an incredibly █
█ powerful new interface control design that allows █
█ value scrolling, stepping and instant selection from █
█ a popup display of every possible value. █
█ █
█ The Gate has adjustments for the Attack and Release █
█ times, the Floor level that the gate closes to, and █
█ the Threshold level. The Threshold setting can also █
█ be visibly displayed against any waveform data in the █
█ SoundFile or MultiTrack View. The Gate Reverse switch █
█ causes the gate to operate in reverse. When the █
█ signal is greater than the threshold, the gate closes █
█ down to the floor setting and when the signal falls █
█ below the threshold, the gate opens back up to full. █
█ This can be used to create a simple and powerful █
█ ducking processor by assigning the key to another █
█ track which will then control when this track lowers █
█ its level. █
█ █
█ The Compressor has adjustments for the Attack and █
█ Release times, the Ratio of compression, and the █
█ Threshold level. The Threshold setting can also be █
█ visibly displayed against any waveform data in the █
█ SoundFile or MultiTrack View. █
█ █
█ Both the Gate and Compressor can be keyed from their █
█ own track's data or from a mix of one or more virtual █
█ buffers or, with the new SAWStudio API power, direct █
█ from any MultiTrack track. █
█ █
█ The Key buffer can also be filtered with the use of █
█ powerful Hi-Cut and Lo-Cut EQ functions that allow █
█ the Levelizer to be easily used as a De-Esser or █
█ other special purpose dynamics processor. Both EQ █
█ filters can cover the entire frequency range and can █
█ even be set to overlap in cutoff frequencies, █
█ allowing the user complete control over frequency █
█ bandwidth. █
█ █
█ The Key Listen switch allows you to listen to the █
█ actual Key data instead of the main audio data █
█ stream, and the new API now allows this switch to █
█ automatically control the console solos so you hear █
█ only what you need to hear. This makes it easy to █
█ adjust the EQ and hear exactly what is triggering the █
█ Gate and Compressor functions. █
█ █
█ The famous SAW Peak Limit / Normalize algorithm █
█ functions LIVE in the SAWStudio environment, without █
█ the need for a data pre-scan. An incredible time █
█ saver for an incredibly powerful mastering tool. Both █
█ settings can also be visibly displayed against any █
█ waveform data in the SoundFile or MultiTrack View. █
█ █
█ The Gain Reduction Meter offers an incredibly █
█ accurate means of displaying just how much adjusting █
█ the module is doing. Its accurate tracking of levels, █
█ attack and release times, and its timing of the audio █
█ transients is unmatched in any software based Windows █
█ plug-in and rivals the reaction time of hardware █
█ displays. █
█ █
█ The Remove Silence function can automatically split █
█ and remove region track data based on the Gate █
█ settings. For this function, the Attack time is used █
█ as a negative pre-threshold split point. This █
█ function can also be used in a Split / Mark mode █
█ whereby all regions are split and marked for viewing █
█ before a simple keystroke finishes the job. █
█ █
█ The Find Peaks function scans a range of audio data █
█ and displays a list of the highest 50 peak values █
█ within that range. The values are displayed as HEX █
█ data values, percent of clipping values, and decibel █
█ values. The actual sample position where the peak █
█ occurred is also displayed. Clicking on any of the █
█ listed items, automatically jumps the MultiTrack █
█ cursor to the exact sample position, allowing instant █
█ viewing and playback. █
█ █
█ The Levelizer module represents one of the most █
█ precision dynamics processing and mastering tools █
█ available anywhere, and can easily replace many of █
█ the high priced hardware based units currently on the █
█ market. Have fun maximizing, finalizing and █
█ Levelizing your audio projects with the SAWStudio █
█ Levelizer Plug-in! █
█ █
█ █
█ http://www.sawstudio.com/ █
█ █
█ █
█ █
█ █
█ █
█ █
█ Installation Notes : █
█ -------------------- █
█ █
█ 1) Unzip, Unrar and run Setup.exe █
█ █
█ 2) Enjoy this fine Team AiR release !!! █
█ █
█ █
█ █
█ █
▄█ █▄
▄█ █▄
▄█▀ ▀█▄
▄██▀ ▀██▄
███ ███
▀██▄ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ ▄ ▄ ▄ ▄ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ ▄██▀
▀▀███▄▄▄▀▀ nFO lAYOUT (c) 2006 bEARCAVE-dESIGN ▀▀▄▄▄███▀▀